Packages on Shelves
Description

These pump are compact, lightweight powerful portable electric submersible pumps. They are whisper quiet and will perform in any position.


  • DISCHARGE CASE: Aluminum, Hard Anodized, 3″ NPTF with 2″ Adapter

  • DIFFUSER: Aluminum, Hard Anodized

  • SUCTION CASE: Aluminum, Hard Anodized, with wear resistant polyurethane liner

  • FRAME & OUTER CASE: Aluminum, Hard Anodized

  • WEAR PLATE: Polyurethane

  • PUMP SHAFT: Stainless Steel

  • IMPELLER: Hardened 17-4 Stainless Steel

  • HARDWARE: Stainless Steel

  • O-RINGS: Buna-N

  • SEAL: Tandem Mechanical, Oil Lubricated

  • INBOARD SEAL: Carbon/Ceramic/Buna-N, Hardware, 300 series stainless

  • OUTBOARD SEAL: Silicon Carbide/Silicon Carbide/Buna-N, Hardware, 300 series stainless

  • STRAINER: Stainless Steel, 1/4″ Holes

  • UPPER BEARING: Single Row, Shielded, Ball, Pre-Lubricated High Temperature Grease, Radial Load

  • LOWER: Single Row, Shielded, Ball, Pre-Lubricated High Temperature Grease, Radial & Thrust Load

  • CORD ENTRY: 50 Ft, SOOW, 12/4, with Strain Relief and Pressure Grommet for Sealing

  • MOTOR: Class H Insulation, VPI Sealed Insulation

  • CONTROL: NEMA 3R Rainproof, with Start Capacitor, Start Relay and Circuit Breaker

  • OPTIONAL: NEMA 4 Weathertight Control, NEMA 4 Dual Float Control, Anti-Sludge Strainer, Carrying Handles

  • WARRANTY: 1 Year

2, 2-1/2 & 2-3/4HP
PF20111, PF20112, PF25132HH & HV, PF25134HH & HV, PF27112

3″ NPT Female with 2″ NPT Adapter, DischargePF20111 & 

  • PF20112:
    2 Hp, 115 & 230 Volt, 1 Phase, 3450 RPM, Max Flow: 175 GPM, Shut Off: 76 Ft

  • PF25132HH /HV, PF25134HH /HV:
    2-1/2 Hp, 230 & 460 Volt, 3 Phase, 3450 RPM, Max Flow: 152/300, Shut Off: 89/50 FT

  • PF27112:
    2-3/4 Hp, 230 Volt, 1 Phase, 3450 RPM, Max Flow: 300 GPM, Shut Off: 50 Ft

Downloads