Packages on Shelves
Description

General purpose pump for residential, light industrial and commercial sump applications.

  • DISCHARGE: 1-1/2” NPT, Male, Vertical, with 1-1/4″ Adapter

  • LIQUID TEMPERATURE: 32 – 77°F

  • MOTOR HOUSING: Epoxy-coated aluminum alloy

  • IMPELLER: Corrosion-resistant, reinforced Thermoplastic

  • PUMP BASE: Corrosion-resistant, reinforced Thermoplastic, Top suction design filters debris and minimizes clogging

  • SHAFT: Stainless Steel

  • HARDWARE: Stainless Steel

  • GASKET: Rubber

  • SEAL: Single mechanical, rubber and stainless steel

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Single row, ball, oil lubricated

  • POWER CORD: SJTW, 18/3 Cord, with plug. 10 ft. long

  • MOTOR: energy efficient, Permanent Split Capacitor (PSC), Oil filled, Class B insulation, Continuous duty (water depth must be at least 6″ to prevent motor from overheating), Auto reset thermal overload protector, Circuit requirements 15 AMP

  • WARRANTY: 3 year

Vertical Float: Mechatronic, Normally Open (N/O), reinforced thermoplastic, SJTW 18/3C, 10 FT, cord with Piggy-back plug, On point – 8.4″, Off point – 4″

Wide Angle Tethered Float: Mechanical, Normally Open (N/O), reinforced thermoplastic, SJOW, 18/2C, 10 Ft. cord with Piggy-back plug, On point – 14.2″, Off point – 5.9″

1/3 HP Sump / Effluent Pump
PFSPPPP3328601F10, PFSPPPP3328601T10
  • 1/3Hp, 3450Rpm, 60Hz, 115 Volt, 1 Phase

  • 1-1/2″ Discharge, 1/4″ Spherical Solids,

  • Thermoplastic

  • PFSPPPP3328601F10 – Vertical Float

  • PFSPPPP3328601T10 – Wide Angle Tethered Float

  • Max Lift: 28 Ft, Max Flow: 60 GPM

Downloads