Packages on Shelves
Description

Submersible Grinder Pumps are designed to reduce domestic, commercial, institutional and light industrial sewage to a finely ground slurry.


  • DISCHARGE: 2” NPT, Female, Vertical

  • LIQUID TEMPERATURE: 160°F Intermittent

  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

  • SEAL PLATE: Cast Iron, Class 30

  • IMPELLER: 12 vane, vortex, with pump out vanes on back side, Dynamically balanced, ISO G6.3 Cast Iron

  • SHREDDING RING & CUTTER: Stainless steel

  • SHAFT & HARDWARE: Stainless steel

  • PAINT: Air dry enamel

  • SQUARE RINGS: Buna-N

  • SEAL: Tandem Double Mechanical, Oil Filled reservoir,   Upper: 1-1/4″ Carbon/Ceramic/Buna-N,   Lower: 1-1/8″ Silicon Carbide/Silicon Carbide/Viton

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Single row, ball, oil lubricated

  • POWER CORD: 30Ft, SOW, 10/4 Cord, Pressure grommet for sealing and strain relief

  • CONTROL CORD: 30Ft, SOW, 18/5 Cord, Pressure grommet for sealing and strain relief

  • MOTOR: Class F Insulation, Oil Filled, Squirrel Cage Induction

  • SINGLE PHASE: Capacitor Start / Capacitor Run, Requires starter or control panel which includes the capacitors. Includes overload protection in motor

  • THREE PHASE: Dual voltage 230/460. Requires overload protection in control panel

  • SEAL LEAK SENSOR: Two probe design, Normally Open (N/O). Requires relay in control panel (Included in PF panels)

  • TEMPERATURE SENSOR: Normally Closed (NC). Requires relay in control panel (Included in PF panels)

  • WARRANTY: 1 year

  • OPTIONAL: Pump Stand, PF82306

PFG 3, 5, 7.5 Hp
PFG3022, PFG3032, PFG3042, PFG5022, PFG5032, PFG5042, PFG7532, PFG7542
  • 3, 5, 7.5 Hp, 3450Rpm, 60Hz

  • 230 Volt, 1 Phase

  • 230, 460 Volt, 3 Phase

  • 2″ Discharge, Double Seal

  • Manual Operation

  • Max Flow: 103/103/103 GPM, Shut Off: 84/130/136 Ft

Downloads