Packages on Shelves
Description

Submersible Grinder Pumps are designed to reduce domestic, commercial, institutional and light industrial sewage to a finely ground slurry.


  • DISCHARGE: 1-1/4” NPT, Female, Vertical, Bolt-on Flange

  • LIQUID TEMPERATURE: 160°F Intermittent

  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

  • SEAL PLATE: Cast Iron, Class 30

  • IMPELLER: 12 vane, vortex, with pump out vanes on back side, Dynamically balanced, ISO G6.3 Bronze

  • SHREDDING RING & CUTTER: Stainless steel

  • SHAFT & HARDWARE: Stainless steel

  • PAINT: Industrial grade powder coating

  • SQUARE RINGS: Buna-N

  • SEAL: Tandem Double Mechanical, 7/8″ inner, 3/4″ outer, Oil Filled reservoir, Carbon/Ceramic/Buna-N

  • UPPER BEARING: Single row, ball, oil lubricated

  • INTERMEDIATE BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Sleeve, oil lubricated

  • POWER CORD: 20Ft, SOW, 12/4 Cord, Custom molded Fast disconnect design for sealing and strain relief

  • MOTOR: Class B Insulation, Oil Filled, Squirrel Cage Induction

  • SINGLE PHASE: Capacitor Start / Capacitor Run, Requires starter or control panel which includes the capacitors. Includes overload protection in motor

  • THREE PHASE: Dual voltage 230/460

  • WARRANTY: 1 year

PFG-HV / HH 2 Hp
PFG2002HV, PFG2022HV, PFG2062HV, PFG2032HHV, PFG2042HV, PFG2002HH, PFG2022HH, PFG2062HH, PFG2032HH, PFG2042HH
  • 2 Hp, 3450Rpm, 60Hz, 200 & 230 Volt, 1 Phase, 200, 230, 460 Volt, 3 Phase, High Volume & High Head

  • 1-1/4″ Discharge, Double Seal,

  • Manual Operation

  • Max Flow: 58/30 GPM, Shut Off: 108/125 Ft

Downloads