Packages on Shelves
Description

Submersible Grinder Pumps are designed to reduce domestic, commercial, institutional and light industrial sewage to a finely ground slurry.


  • DISCHARGE: 1-1/4” NPT, Female, Vertical, Bolt-on Flange

  • LIQUID TEMPERATURE: 160°F Intermittent

  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

  • SEAL PLATE: Cast Iron, Class 30

  • IMPELLER: 12 vane, vortex, with pump out vanes on back side, Dynamically balanced, ISO G6.3 Bronze

  • SHREDDING RING & CUTTER: Stainless steel

  • SHAFT & HARDWARE: Stainless steel

  • PAINT: Industrial grade powder coating

  • SQUARE RINGS: Buna-N

  • SEAL: Outboard, Single mechanical, 3/4″, Oil Filled reservoir, Carbon/Ceramic/Buna-N

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Single row, ball, oil lubricated

  • POWER CORD: 20Ft, SOW, 12/3 Cord with Piggy-Back plug, Pressure grommet for sealing and strain relief

  • MOTOR: Class B Insulation, Oil Filled, Squirrel Cage Induction

  • SINGLE PHASE: Includes Start & Run capacitors, Includes overload protection in motor

  • LEVEL CONTROL: On HVSA & HHSA models; Wide Angle, Mechanical, 20 Ft Cord with Piggy-Back plug, Normally Open (N/O), Adjustable pumping range

  • WARRANTY: 1 year

PFGPC-HVS / HHS
PFGPC2002HVS, PFGPC2022HVS, PFGPC2022HVSA, PFGPC2002HHS, PFGPC2022HHS, PFGPC2022HHSA
  • 2 Hp, 3450Rpm, 60Hz, 200 & 230 Volt, 1 Phase, High Volume & High Head

  • 1-1/4″ Discharge, Single Seal

  • ,Manual & Automatic Operation

  • Max Flow: 58/30 GPM, Shut Off: 108/125 Ft

Downloads