Mechanical, 5 Amp, SGMNO & SGMSPDT
Used for activating pump controls and alarms
This mechanically-activated, narrow angle control switch is designed to activate pump control panels and alarms. This control switch is used to accurately monitor liquid levels in potable water, water and sewage applications. These pump switches can be wired in either normally open or normally closed applications and are not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications
Note: These switches are not recommended for controlling; electric loads less the 100 milliamps, 12 VAC or non-arcing electric loads.
CABLE: Flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE).
FLOAT: 2.74” OD x 4.83” long high impact, corrosion resistant, polypropylene housing for use in sewage and non-potable water up to 140°F
ELECTRICAL: 5 amp, 125/250 VAC, 60Hz
CONTROL DIFFERENTIAL: 1.5 inches above or below horizontal
MAXIMUM WATER DEPTH: 30 feet or 13 psi
Mechanically-activated, snap action contacts
Passed NSF Standard 61 protocol by an approved Water Quality Association Laboratory
UL Listed for use in water and sewage