Packages on Shelves
Description

Submersible Non-Clog Sewage pumps are designed for typical raw sewage applications.


  • DISCHARGE: 4” 125 lb, ANSI Flange, Horizontal

  • LIQUID TEMPERATURE: 104°F Continuous

  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

  • IMPELLER: 2 vane, open type with pump out vanes on back side, Dynamically balanced, ISO G6.3, Cast Iron, Class 30

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Double row, ball, oil lubricated

  • POWER CORD: 25Ft, SOW, 10/4 Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief

  • SENSOR CORD: 25Ft, SOW, 18/5, Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief

  • MOTOR: Class F Insulation, Oil Filled

  • SINGLE PHASE: Capacitor Start/Capacitor Run. Requires starter or panel which includes capacitors and overload protection. (Included in PF panels)

  • THREE PHASE: 230/460 dual-voltage motor. Requires overload protection to be included in control panel (Included in PF panels)

  • SEAL LEAK SENSOR: Normally Open (N/O), 2 probe design, requires relay in control panel (Included in PF panels)

  • TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)

  • WARRANTY: 1 year

  • SHAFT & HARDWARE: Stainless steel

  • SEAL PLATE: Cast Iron, Class 30

  • PAINT: Air dry enamel

  • SQUARE RINGS: Buna-N

  • SEAL: Double Mechanical, 1-1/4″, Oil Filled pressure equalized reservoir, Upper-

PF4NC, 4.5-15HP, 1750 RPM
PF4NC4524, PF4NC4534, PF4NC4544, PF4NC4564, PF4NC7524, PF4NC7534, PF4NC7544, PF4NC7564, PF4NC11334, PF4NC11344, PF4NC11364, PF4NC15034, PF4NC15044
  • 4.5 Hp, 7.5 Hp, 1750 Rpm, 60 Hz, 230 Volt, 1 Phase

  • 4.5 Hp, 7.5 Hp, 11.3 Hp, 15 Hp, 1750 Rpm, 60 Hz, 208, 230 & 460 Volt, 3 Phase

  • 4″ Discharge, 3″ Spherical Solids, Double Seal

  • Max Flow: 600/700/875/925 GPM, Shut Off: 40/50/70/80 Ft

Downloads