Packages on Shelves
Description

Submersible Non-Clog Sewage pumps are designed for typical raw sewage applications.


  • DISCHARGE: 6” 125 lb, ANSI Flange, Horizontal

  • LIQUID TEMPERATURE: 104°F Continuous

  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

  • IMPELLER: Single vane, enclosed type with pump out vanes on back side, Dynamically balanced, ISO G6.3, Cast Iron, Class 30

  • SHAFT & HARDWARE: Stainless steel

  • SEAL PLATE: Cast Iron, Class 30

  • PAINT: Air dry enamel

  • SQUARE RINGS: Buna-N

  • SEAL: Double Mechanical, 1-7/8″, Oil Filled pressure equalized reservoir, Upper- Carbon/Ceramic/Buna-N, Lower- Silicon Carbide/Silicon Carbide/Buna-N

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Double row, ball, oil lubricated

  • POWER CORD: 25Ft, 2/3-3G Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief

  • SENSOR CORD: 25Ft, SOW, 18/5, Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief

  • MOTOR: Class F Insulation, Oil Filled

  • SINGLE PHASE: Capacitor Start/Capacitor Run. Requires starter or panel which includes capacitors and overload protection. (Included in PF panels)

  • THREE PHASE: 230/460 dual-voltage motor. Requires overload protection to be included in control panel (Included in PF panels)

  • SEAL LEAK SENSOR: Normally Open (N/O), 2 probe design, requires relay in control panel (Included in PF panels)

  • TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)

  • WARRANTY: 1 year

PF6NC, 18-60HP, 1750 RPM
PF6NC18034, PF6NC18044, PF6NC24034, PF6NC24044, PF6NC30034, PF6NC30044, PF6NC36034, PF6NC36044, PF6NC48044, PF6NC60044
  • 18 Hp, 12 Hp, 24 Hp, 30 Hp, 36 Hp, 48 Hp, 60 Hp, 1750 Rpm, 60 Hz, 230 & 460 Volt, 3 Phase

  • 6″ Discharge, 3″ Spherical Solids, Double Seal

  • Max Flow: 1600/1600/1600/1600/2000/2200 GPM, Shut Off: 100/125/140/160/210/240 Ft

Downloads