1/2 HP Sump Pump
Description

General purpose pump for residential, light industrial and commercial sump applications.


  • DISCHARGE: 1-1/2” NPT, Male, Vertical, with 1-1/4″ Adapter

  • LIQUID TEMPERATURE: 32 – 77°F
    MOTOR HOUSING: Cast Iron

  • IMPELLER: Corrosion-resistant, reinforced Thermoplastic

  • PUMP BASE: Cast Iron

  • SHAFT: Stainless Steel

  • HARDWARE: Stainless Steel

  • GASKET: Rubber

  • SEAL: Single mechanical, rubber and stainless steel

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Single row, ball, oil lubricated

  • POWER CORD: SJTW, 18/3 Cord, with plug. 10 ft. and 20 ft. long

  • MOTOR: energy efficient, Permanent Split Capacitor (PSC), Oil filled, Class B insulation, Continuous duty (water depth must be at least 6″ to prevent motor from overheating), Auto reset thermal overload protector, Circuit requirements 15 AMP

  • WARRANTY: 3 year


Vertical Float: Mechatronic, Normally Open (N/O), reinforced thermoplastic, SJTW 18/3C, 10 FT or 20 FT., cord with Piggy-back plug, On point – 8.8″, Off point – 4.4″

Wide Angle Tethered Float: Mechanical, Normally Open (N/O), reinforced thermoplastic, SJOW, 18/2C, 10 Ft. cord with Piggy-back plug, On point – 14.6″, Off point – 6.3″

1/2 HP Sump Pump
PFSPCPC5030721F10, PFSPCPC5030721F20, PFSPCPC5030721T10
  • 1/2Hp, 3450Rpm, 60Hz, 115 Volt, 1 Phase

  • 1-1/2″ Discharge, 1/4″ Spherical Solids,

  • Cast Iron

  • PFSPCPC5030721F10 & F20 – Vertical Float

  • PFSPCPC5030721T10 – Wide Angle Tethered Float

  • Max Lift: 30 Ft, Max Flow: 72 GPM

Downloads