
Description
Submersible Non-Clog Sewage pumps are designed for typical raw sewage applications.
DISCHARGE: 3” NPT, Female, Vertical, Bolt-on Flange
LIQUID TEMPERATURE: 104°F Continuous
MOTOR HOUSING/VOLUTE: Cast Iron, Class 30
IMPELLER: 2 vane, open type, Cast Iron, Class 30
SHAFT & HARDWARE: Stainless steel
SEAL PLATE: Cast Iron, Class 30
PAINT: Air dry enamel
O-RINGS: Buna-N
SEAL: Inboard, Single mechanical, 1″, Oil Filled reservoir, Silicon Carbide/Silicon Carbide/Buna-N with secondary exclusion seal
UPPER BEARING: Single row, ball, oil lubricated
LOWER BEARING: Single row, ball, oil lubricated
POWER CORD- 1-1/2 Hp & 2 Hp 3 Phase: 25Ft, SOW, 10/4 Cord, Pressure grommet for sealing and strain relief
POWER CORD- 1-1/2 Hp, 2 Hp 1 Phase & all 3 Hp: 25Ft. SOW, 10/3 & 10/4 Cord. Epoxey sealed housing with secondary pressure grommet for sealing and strain relief
MOTOR: Class B Insulation, Oil Filled, Squirrel Cage Induction
SINGLE PHASE: Permanent Split Capacitor (PSC), Includes overload protection in motor
THREE PHASE: 230/460 is dual-voltage motor. Requires overload protection to be included in control panel
WARRANTY: 1 year
PFSE- 1-1/2, 2, 3Hp
PFSE1524, PFSE1594, PFSE1544, PFSE2024, PFSE2094, PFSE2044, PFSE3024, PFSE3094, PFSE3044
1-1/2 Hp, 2 Hp, 3 Hp, 1750Rpm, 60Hz, 230 Volt, 1 Phase, 230 & 460 Volt, 3 Phase
3″ Discharge, 2-1/2″ Spherical Solids,
Manual Operation
Max Flow: 375/410/435 GPM, Shut Off: 41/52/65 Ft