Packages on Shelves
Description

Submersible water or Solids Handling Sewage pumps are designed for High Temperature applications.


  • DISCHARGE: 2” NPT (Optional 3″), Female, Vertical, Bolt-on Flange

  • LIQUID TEMPERATURE: 200°F Continuous

  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

  • IMPELLER: 2 vane, open type, Cast Iron, Class 30

  • SHAFT & HARDWARE: Stainless steel

  • SEAL PLATE: Cast Iron, Class 30

  • PAINT: Industrial grade powder coating

  • O-RINGS: Buna-N

  • SEAL: Inboard, Single mechanical, 5/8″, Oil Filled reservoir, Carbon/Ceramic/Buna-N with secondary exclusion seal

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Single row, ball, oil lubricated

  • POWER CORD: 15Ft, SOOW, Fast disconnect design, 14/3 Cord with Piggy-Back plug

  • MOTOR: Class F Insulation, Oil Filled, Squirrel Cage Induction

  • SINGLE PHASE: Permanent Split Capacitor (PSC), Includes overload protection in motor

  • STRAINER: Bar type. 1/2″ solids through strainer

  • OPTIONAL LEVEL CONTROL: 200ºF High Temperature Wide Angle, Mechanical, Normally Open (N/O), 15 Ft cord with Piggy-Back plug

  • WARRANTY: 1 year

PFSE51HT
PFSE51HT
  • 1/2 Hp,  1750Rpm, 60Hz, 200ºF, 115 Volt, 1 Phase

  • 2″ Discharge (Optional 3″ Flange), 1/2″ Spherical Solids (with strainer)

  • Manual Operation: (Optional High Temp Float)

  • Max Flow: 160 GPM, Shut Off: 25 Ft

Downloads