Packages on Shelves
Description

Submersible sewage pump designed for typical raw sewage and typical septic tank/effluent applications.

  • DISCHARGE: 2” NPT, Female, Vertical

  • LIQUID TEMPERATURE: 32 – 131°F

  • MOTOR HOUSING: Cast Iron

  • IMPELLER: Corrosion-resistant, reinforced Thermoplastic

  • PUMP BASE: Cast Iron

  • SHAFT: Stainless Steel

  • HARDWARE: Stainless Steel

  • GASKET: Rubber

  • SEAL: Single mechanical, Carbon/Ceramic/Stainless Steel

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Single row, ball, oil lubricated

  • POWER CORD: 115 Volt – SJTW, 18/3 Cord, with Piggy-back plug. 10 ft. long.

  • MOTOR: Energy efficient, Permanent Split Capacitor (PSC), Oil filled, Class B insulation, Continuous duty (water depth must be at least 6″ to prevent motor from overheating), Auto reset thermal overload protector, Circuit requirements; 115V – 15 AMPS

  • WARRANTY: 3 year

Wide Angle Tethered Float: Mechanical, Normally Open (N/O), reinforced thermoplastic, 115V – SJOW, 18/2C, 10 Ft. cord with Piggy-back plug, On point – 15.1″, Off point – 6.8″

Sewage Pump PFSWCPC50181081T10
PFSWCPC50181081T10
  • 1/2Hp, 3450Rpm, 60Hz, 115 Volt, 1 Phase

  • 2″ Discharge, 2″ Spherical Solids,

  • Cast Iron

  • PFSWCPC50181081T10 – Wide Angle Tethered Float

  • Max Lift: 18 Ft, Max Flow: 108 GPM

Downloads