Building Services > Sump, Utility and Sewage Pumps > Sewage Pump PFSWCPC75201451F10 & 52F10, PFSWCPC75201451T10 & 52T10
Sewage Pump PFSWCPC75201451F10 & 52F10, PFSWCPC75201451T10 & 52T10
PFSWCPC75201451F10, PFSWCPC75201452F10, PFSWCPC75201451T10, PFSWCPC75201452T10
3/4Hp, 1750Rpm, 60Hz, 115 & 230Volt, 1 Phase
2″ Discharge, 2″ Spherical Solids,
Cast Iron
PFSWCPC75201451F10 & 2F10 – Vertical
FloatPFSWCPC75201451T10 & 2T10 – Wide Angle Tethered Float
Max Lift: 20 Ft, Max Flow: 145 GPM
Description
Submersible sewage pump designed for typical raw sewage and typical septic tank/effluent applications.
DISCHARGE: 2” NPT, Male, Vertical
LIQUID TEMPERATURE: 32 – 131°F
MOTOR HOUSING: Cast Iron
IMPELLER: Corrosion-resistant, reinforced Thermoplastic
PUMP BASE: Cast Iron
SHAFT: Stainless Steel
HARDWARE: Stainless Steel
GASKET: Rubber
SEAL: Single mechanical, Carbon/Ceramic/Stainless Steel
UPPER BEARING: Single row, ball, oil lubricated
LOWER BEARING: Single row, ball, oil lubricated
POWER CORD: 115 Volt – SJTW, 16/3 Cord, with Piggy-back plug. 10 ft. long.
POWER CORD: 230 Volt – SJTW, 18/3 Cord with Piggy-back plug, 10 ft. long.
MOTOR: Energy efficient, Permanent Split Capacitor (PSC), Oil filled, Class B insulation, Continuous duty (water depth must be at least 6″ to prevent motor from overheating), Auto reset thermal overload protector, Circuit requirements; 115V – 20 AMPS, 230V – 10 AMPS
WARRANTY: 3 year
Vertical Float: Mechatronic, Normally Open (N/O), reinforced thermoplastic, 115V – SJTW 16/3C, 230V – SJTW 18/3C, 10 FT. cord with Piggy-back plug, On-Off points are adjustable, Attaches to Discharge Piping.
Wide Angle Tethered Float: Mechanical, Normally Open (N/O), reinforced thermoplastic, 115V – SJOW, 16/2C, 230V – SJOW 18/2C, 10 Ft. cord with Piggy-back plug, On point – 16.5″, Off point – 8.7″