top of page
Wide Angle

Wide Angle

Mechanical, Pump Down, PMPD, 15 Amp

15 Ft to 50 Ft Cord



This mechanically-activated, wide-angle switch provides automatic control of pumps up to 3/4HP at 120 VAC and 2 HP at 230 VAC in potable water, water and sewage applications. These pump switches are not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications. 

This switch must be used with pumps that provide integral thermal overload protection.

DIRECT WIRING - Units used for direct wiring (without plug) may be used in 125 VAC or 250 VAC applications within specified amp ratings.

  • CABLE: Flexible 14 gauge, 2 conductor (UL, CSA) SJOO/W, water-resistant (CPE). With or without plug. 

  • FLOAT: 3.05” OD x 3.56” long high impact, corrosion resistant, PVC housing for use in sewage and non-potable water up to 140°F

  • PUMPING RANGE: Adjustable 7 to 36 inches.

  • Mechanically-activated, snap action contacts 

  • Passed NSF Standard 61 protocol by an approved Water Quality Association Laboratory

  • UL Recognized for use in water and sewage

  • CSA Certified

  • Pump Down is normally open (N/O) contacts for emptying


Browse Accessories

bottom of page