top of page
PF4SCE

PF4SCE

PF4SCE4236, PF4SCE4246, PF4SCE12934, PF4SCE12944, PF4SCE17734, PF4SCE17744

  • 4.2 Hp, 1150 Rpm, 60 Hz, 230 & 460 Volt, 3 Phase

  • 12.9 Hp & 17.7 Hp, 1750 Rpm, 60 Hz, 230 & 460 Volt, 3 Phase

  • 4″ Discharge, Tandem Seal

  • Max Flow: 460/660/750 GPM, Shut Off: 35/68/98 Ft

Description

Severe duty submersible Cutter pumps are designed for un-screened stringy, fiberous raw sewage applications.


  • DISCHARGE: 4” 125 lb, ANSI Flange, Horizontal

  • LIQUID TEMPERATURE: 104°F Continuous

  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

  • SEAL PLATE: Cast Iron, Class 30

  • IMPELLER/CUTTER CONE: 2 port, enclosed, Cast Iron, spiral cutter integral with impeller, Hardened steel 52/53 Rockwell “C”

  • CUTTER BLADE: Hardened steel 45/47 Rockwell “C”

  • SHAFT: 420 Stainless steel

  • HARDWARE: 300 series Stainless steel

  • PAINT: Air dry enamel

  • SQUARE RINGS: Buna-N

  • SEAL: Tandem Mechanical, Oil Filled reservoir, Upper- Carbon/Ceramic/Buna-N, Lower- Tungsten Carbide/Tungsten Carbide/Buna-N

  • UPPER BEARING: Single row, ball, grease lubricated

  • LOWER BEARING: Double row, ball, grease lubricated

  • POWER CORD: 30Ft, 4G1.5mm², Pressure grommet for sealing

  • SENSOR CORD: 30Ft, 4G1.5mm², Pressure grommet for sealing

  • MOTOR: NEMA B, Air filled, Class F Insulation

  • THREE PHASE: Dual voltage 230/460, Includes overload protection in motor

  • SEAL LEAK SENSOR: Normally Open (N/O), 1 probe design, requires relay in control panel (Included in PF panels)

  • TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)

  • WARRANTY: 1 year

Downloads

Browse Accessories

bottom of page