Submersible Solids Handling Sewage pumps are designed for typical raw sewage applications.

• DISCHARGE: 6” 125 lb, ANSI Flange, Horizontal

• LIQUID TEMPERATURE: 104°F Continuous

• MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

• IMPELLER: Single vane, enclosed type with pump out vanes on back side, Dynamically balanced, ISO G6.3, Cast Iron, Class 30

• SHAFT & HARDWARE: Stainless steel

• SEAL PLATE: Cast Iron, Class 30

• PAINT: Air dry enamel

• SQUARE RINGS: Buna-N

• SEAL: Double Mechanical, 1-7/8″, Oil Filled pressure equalized reservoir, Upper- Carbon/Ceramic/Buna-N, Lower- Silicon Carbide/Silicon Carbide/Buna-N

• UPPER BEARING: Single row, ball, oil lubricated

• LOWER BEARING: Double row, ball, oil lubricated

• POWER CORD: 25Ft, 2/3-3G Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief

• SENSOR CORD: 25Ft, SOW, 18/5, Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief

• MOTOR: Class F Insulation, Oil Filled

• SINGLE PHASE: Capacitor Start/Capacitor Run. Requires starter or panel which includes capacitors and overload protection. (Included in PF panels)

• THREE PHASE: 230/460 dual-voltage motor. Requires overload protection to be included in control panel (Included in PF panels)

• SEAL LEAK SENSOR: Normally Open (N/O), 2 probe design, requires relay in control panel (Included in PF panels)

• TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)

• WARRANTY: 1 year