Severe duty submersible Cutter pumps are designed for un-screened stringy, fiberous raw sewage applications.

• DISCHARGE: 4” 125 lb, ANSI Flange, Horizontal

• LIQUID TEMPERATURE: 104°F Continuous

• MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

• SEAL PLATE: Cast Iron, Class 30

• IMPELLER/CUTTER CONE: 2 port, enclosed, Cast Iron, spiral cutter integral with impeller, Hardened steel 52/53 Rockwell “C”

• CUTTER BLADE: Hardened steel 45/47 Rockwell “C”

• SHAFT: 420 Stainless steel

• HARDWARE: 300 series Stainless steel

• PAINT: Air dry enamel

• SQUARE RINGS: Buna-N

• SEAL: Tandem Mechanical, Oil Filled reservoir, Upper- Carbon/Ceramic/Buna-N, Lower- Tungsten Carbide/Tungsten Carbide/Buna-N

• UPPER BEARING: Single row, ball, grease lubricated

• LOWER BEARING: Double row, ball, grease lubricated

• POWER CORD: 30Ft, 4G1.5mm², Pressure grommet for sealing

• SENSOR CORD: 30Ft, 4G1.5mm², Pressure grommet for sealing

• MOTOR: NEMA B, Air filled, Class F Insulation

• THREE PHASE: Dual voltage 230/460, Includes overload protection in motor

• SEAL LEAK SENSOR: Normally Open (N/O), 1 probe design, requires relay in control panel (Included in PF panels)

• TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)

• WARRANTY: 1 year