top of page



  • 4/10 Hp, 1750Rpm, 60Hz, 200ºF, 115 Volt, 1 Phase

  • 2″ Discharge, 1/2″ Spherical Solids (with strainer),

  • Manual Operation: Optional High Temp. Float

  • Max Flow: 90 GPM, Shut Off: 24 Ft


Submersible Solids Handling Sewage pumps are designed for high temperature water and raw sewage applications.

  • DISCHARGE: 2” NPT, Female, Vertical

  • LIQUID TEMPERATURE: 200°F Continuous High Temperature

  • MOTOR HOUSING/ VOLUTE: Cast Iron, Class 30

  • SEAL PLATE: Cast Iron, Class 30

  • IMPELLER: 2 vane open with pump out vanes on back side, Dynamically balanced, Cast Iron, Class 30

  • SHAFT & HARDWARE: Stainless steel

  • PAINT: Industrial grade powder coating


  • SEAL: Inboard, Single mechanical, 5/8″, Oil Filled Chamber, Silicon Carbide/Silicon Carbide/Buna-N with Secondary Exclusion seal

  • UPPER BEARING: Single row, ball, oil lubricated

  • LOWER BEARING: Single row, ball, oil lubricated

  • POWER CORD: 15Ft., SOOW, 14/3 Cord with Piggy-Back plug, Pressure grommet for sealing & strain relief

  • MOTOR: Class H Insulation, Vacuum Pressure Impregnated (VPI), Oil Filled, Squirrel Cage Induction

  • SINGLE PHASE: Permanent Split Capacitor (PSC), Includes overload protection in motor

  • OPTIONAL: 200ºF High Temperature Wide Angle Level Control, Mechanical, with Piggy-Back plug, 15 Ft Cord

  • WARRANTY: 1 year

PFS411HT – STRAINER: Sludge, Bar type, 1/2″ solids through strainer

PFS411HTCE – STRAINER: Sludge, Bar type with 3″ Extended feet. 1/2″ solids through strainer


Browse Accessories

bottom of page