PFSEP5010T A,C,D Pre-Packaged 1/2Hp Basin Assembly

PFSEP5010TA, TC & TD

18″ x 30″ Basin Package w/Structural Foam, (1 Piece or 2), or Steel Cover
2″ or 3″ Discharge Pipe, 2″ Vent, 4″ Inlet (Rubber Grommet or Cast Iron Hub)
2″ or 3″ PVC Compression Style Swing Check Valve, and
PFSWCPC50181081T10 Sewage Pump – Wide Angle Tethered Float
1/2Hp, 3450Rpm, 60Hz, 115 Volt, 1 Phase
2″ Discharge, 2″ Solids, Cast Iron
Max Lift: 18 Ft, Max Flow: 108 GPM

Description

Simplex sewage ejector systems are ideal for residential, small commercial, light industrial and agricultural liquid waste applications. These systems are designed to collect liquids and solid waste material from lavatories, floor drains, sinks, showers, laundry trays, water closets, etc.

BASIN: 18″ Dia. x 30″ Deep (30 U.S. Gallons) Structural Foam
INLET: PFSEP5010TA – 4″ Rubber Grommet
PFSEP5010TC – 4″ Cast Iron Hub
PFSEP5010TD – 4″ Rubber Grommet
BASIN COVER: Gasketed Structural Foam with 2″ Vent & Electrical Grommets
PFSEP5010TA – Two Piece, 2″ Discharge
PFSEP5010TC – Two Piece, 2″ Discharge
PFSEP5010TD – One Piece, 3″ Discharge
DISCHARGE PIPE: Sch40 PVC with Air Bleed Hole
PFSEP5010TA, TC – 2″ x 40″ Lg.
PFSEP5010TD – 3″ x 34″ Lg.
PIPE FITTING: 2″ Male Adapter, Sch40 PVC (TA, TC, TD)
3″ x 2″ PVC Reducer, Sch40 (TD)
DISCHARGE VALVE: 2″ PVC, Compression Style Swing Check (TA, TC)
3″ PVC, Compression Style Check (TD)
HARDWARE: Stainless Steel
SEWAGE PUMP: PFSWCPC50181081T10 – 1/2Hp, 115 Volt, 1Ph, 3450Rpm, Cast Iron, 10Ft Cord, Wide Angle Tethered Float, Mechanical, N/O, 10Ft. Cord w/Piggy-Back plug, On point – 15.1″, Off point – 6.8″
WARRANTY: 3 year